Kingston 4GB, DDR4, 2666MHz (PC4-21300), CL19, DIMM Memory

£23.93

This document describes ValueRAM's KVR26N19S6/4 is a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard  latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. 
 
 
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 8 internal banks; 2 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free

12 in stock

SKU: 740617282733 Category:

Description

Specification

  • DDR Type: DDR4
  • Size: 1 x 4GB
  • Series: Kingston ValueRAM
  • Speed: 2666 MHz
  • Compliance: PC4-21300
  • Pins: 288-pin
  • #Hide#Individual Module Size: 4GB
  • #Hide#Total Capacity: 4GB Total
  • CAS Latency: CL19
  • Data Integrity Check: Non-ECC
  • Low Voltage:
  • Voltage: 1.2V
  • Timings: 19-19-19
  • Heatsink: No
  • Heatsink Details:
  • Additional Information: See Overview
  • #Hide#LED Lighting: No
  • LED Lighting:
  • Package Type: Retail
  • Package Weight: 0.0225
  • Warranty: Lifetime

Additional information

Weight 0.0225 kg

Reviews

There are no reviews yet.

Be the first to review “Kingston 4GB, DDR4, 2666MHz (PC4-21300), CL19, DIMM Memory”

Your email address will not be published. Required fields are marked *